 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PB Unit type Ordering information PBA10F R PB 1 2 A 3 10 4 F 5 -O 6 -O Recommended Noise Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current type : NAM series *The Noise Filter is recommended *to connect with several devices. 1Series name 2Single output 3Output wattage 4Universal input 5Output voltage 6Optional C :with Coating G :Low leakage current E :Low leakage current and EMI class A T :Vertical terminal block J :Connector type N :with Cover (UL508 is pending for approval) N1 :with DIN rail V :Output voltage setting potentiometer externally Cover is optional MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT PBA10F-5 10 5V 2A PBA10F-12 10.8 12V 0.9A PBA10F-24 12 24V 0.5A SPECIFICATIONS PBA10F-5 PBA10F-12 PBA10F-24 AC85 - 264 1f or DC110 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *3) ACIN 100V 0.30typ (Io=100%) CURRENT[A] ACIN 200V 0.20typ (Io=100%) FREQUENCY[Hz] 50/60 (47 - 440) or DC INPUT ACIN 100V 74typ 76typ 77typ EFFICIENCY[%] ACIN 200V 74typ 76typ 77typ ACIN 100V 15typ (Io=100%) INRUSH CURRENT[A] ACIN 200V 30typ (Io=100%) LEAKAGE CURRENT[mA] 0.15/0.30max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) VOLTAGE[V] 5 12 24 CURRENT[A] 2 0.9 0.5 LINE REGULATION[mV] 20max 48max 96max LOAD REGULATION[mV] 40max 100max 150max 0 to +50C *1 80max 120max 120max RIPPLE[mVp-p] -10 - 0C *1 140max 160max 160max 0 to +50C *1 120max 150max 150max RIPPLE NOISE[mVp-p] OUTPUT -10 - 0C *1 160max 180max 180max 0 to +50C 50max 120max 240max TEMPERATURE REGULATION[mV] -10 to +50C 60max 150max 290max *2 20max 48max 96max DRIFT[mV] START-UP TIME[ms] 200typ(ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. HOLD-UP TIME[ms] 20typ (ACIN 100V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 4.50 - 5.50 10.0 - 13.2 19.2 - 27.0 OUTPUT VOLTAGE SETTING[V] 5.00 - 5.15 12.00 - 12.48 24.00 - 24.96 OVERCURRENT PROTECTION Works over 105% of rated current and recovers automatically PROTECTION OVERVOLTAGE PROTECTION[V] 5.75 - 7.00 15.0 - 18.0 30.0 - 37.0 CIRCUIT AND OPERATING INDICATION LED (Green) OTHERS REMOTE ON/OFF None INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) ISOLATION INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) OUTPUT-FG AC500V 1minute, Cutoff current = 25mA, DC500V 50MWmin (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +71C (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing) 3,000m (10,000feet) max ENVIRONMENT VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN SAFETY AND CONDUCTED NOISE Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B NOISE Low Voltage Directive, EMC Directive REGULATIONS CE MARKING HARMONIC ATTENUATOR Complies with IEC61000-3-2 (Not built-in to active filter *4) CASE SIZE/WEIGHT * Parallel operation with max (without possible. *1 Measured by 20MHz oscilloscope or Ripple-Noise 31X78X68mm KEISOKU-GIKEN meter(equivalent to (without terminal block) (WXHXD) / 150gother model is not cover) OTHERS * Derating is required when operated with cover. :RM101). COOLING METHOD Convection *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 Derating is required. *4 When two or more units are used,they may not comply with the harmonic attenuator. Please Distribution: contact us for details. * A sound may occur from power supply at peak loading. MODEL VOLTAGE[V] A-4 RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice PBA10F Block diagram PB FUSE AC250V 2.5A AC IN 85 - 264V NOISE FILTER INRUSH CURRENT LIMIT RECTIFIER AND FILTER FG TRANSFORMER CONTROL INVERTER RECTIFIER AND FILTER DC OUT CURRENT SENSING Photocoupler CONTROL Photocoupler OVER VOLTAGE PROTECTION External view External size of option T,J,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details. 18 Voltage adjust 12.21.5 2.5 LED 16.52 Cover name plate 68 M3 +V 70.5 -V FG AC(L) AC(N) 78 7.5 11.5 9.5 49.50.5 4 Point A:C102 Name plate 2-M3 Mounting hole 34.5 PBA10F 2-M3 Mounting hole Cover (option) 15.11.5 22.61.5 Terminal cover Tolerance : 1 Mass : 150g or less (without cover) PCB Material/thickness : CEM3 / 1.6mm Chassis material : Electric galvanizing steel board Dimensions in mm Mounting torque : 0.6N * m(6.3kgf * cm)max Screw tightening torque : M3 0.8N * m(8.5kgf * cm)max Please connect safety ground to the unit in 2-M3 holes. 36 0.5 11 Distribution: RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de 18 31 34.5 A-5 Anderungen vorbehalten / subject to change without notice |
Price & Availability of PBA10F-12
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |